 Model 301-LCCA Carrying
Case The Model 301-LCCA carrying case is designed to embrace the S310 or
D200 indicators along with Astral calorimeters, Vector pyroelectric detectors,
and Ultra calorimeters as well as bases, cables, and power cords.
AC25H and AC50H Calibration Heaters The heaters are mounted to the absorber of Astral calorimeters allowing easy in-house calibrations. |
 Fiberoptic Holder and Adapters The fiberoptic holder and adapters provide direct fiber hookup to the Astral calorimeter and Vector pyroelectric detectors (except the SP and HR models). Adapters that accept SMA, ST, FC, DIN, E2000 connectors or any 2.5 mm ferrule are available. |
 The VH STAND holds the H410 indicator upright on a table top.
 Model 301-019 Base The base holds the calorimeters and pyroelectric detectors upright on a table top. |
 Model 36-0203A Isoperibol Enclosure
The 36-0203A isolates the 25 mm Astral calorimeters from environmental
thermal disturbances which affect the stability of the calorimeter output
when attempting low power and energy measurements. Scientech recommends
using this enclosure when attempting power measurements below 30 mW and
single pulse energy measurements below 30 mJ. |
 Model 301-020R Photodiode Detector The high speed photodiode detector is designed for use with the 25 mm Astral calorimeters as an attachment to the calorimeter aperture. Energy scattered back from the calorimeter's absorber when struck by an energetic pulse provides an attenuated sample of the incident laser pulse sufficient to activate the silicon diode. This provides a temporal profile of the laser pulse when viewed on an oscilloscope. An internal battery eliminates all wires but the coaxial cable to the sampling oscilloscope. |
 Model VH LCC Carrying Case
The Model VH LCC carrying case handles the H410 indicators along with Astral
calorimeters and Vector pyroelectric detectors as well as bases, cables,
charger, and standard protective soft case. |